When cables need to be stacked together, or where a lower friction surface is desired, there are two different cable finishes available: GlideRite™ and SlideRite™. Simply note in the Comment box below which coating you'd like.

GlideRite™:

• The lowest friction available, the cable is as slippery as Teflon®
• Compound is chemically bonded to the cable, and will not rub or peel off
• Cable retains all performance characteristics, including temperature range and flexibility (See Tech Note).
• Cost is $2-$3 per foot (Minimum lot charge may apply for low quantities)
• Continuous lengths not available, cable needs to be supplied in 30-80 foot lengths
• Lead-time is 3 weeks

• Reduced friction, similar to a PVC cable jacket
• Compound is chemically bonded to the cable, and will not rub or peel off
• Cable retains all performance characteristics, including temperature range and flexibility
• Continuous lengths can be coated
• Makes cables slightly cloudy in color
• Cost is $.25 - $1 per foot, depending on cable run lengths
• Lead-time is 1 week

Add hollow tubing to cables for transporting fluid and gasses.

• Standard PTFE, Tygon® and PVC tubes can be integrated in any cable
• Most diameter sizes supported
• Specify any location and number of tubes in combination with other conductors
• Note tubing materials, ID and OD, and any other specifications in the comment box at bottom of page.

StripMount™ fiber-reinforced ribbon enables quick and easy cable mounting, and eliminates the need for bulky, expensive cable management systems. With our patented StripMount™ option, fasteners may be safely inserted through the cable for secure attachment to virtually any surface.

Note in the Comment box a specific location for StripMount™ (i.e.- Between 2nd and 3rd conductor.) as necessary.

Cicoil's exclusive extrusion process allows the addition of a wide variety of conductors, such as coaxial, video, and fiber optics. Let us know what conductor(s) you would like added, and we will confirm price and compatibility.

Cicoil will produce complete cable assemblies to your specifications with the connectors of your choice. Simply specify the required connector(s) in the Comment box below, and a Cicoil representative will call to confirm the final configuration with you.

Select this option to have Cicoil prepare one or both ends of cable for connectors or other termination. Cable will be stripped as illustrated.

• Silicone jacket is removed 1" from end of conductors.
• Insulation (if present) is stripped 0.5" from end of conductors.

Please note in comment box below if you want one or both ends prepped.

Note: This option is not needed if you are ordering a Complete Assembly.


Learn how to prep Cicoil silicone cable for termination here.